4 Tread Mobile Safety Steps - Spring-Loaded Castors - 3.1m Approx Working Height

How do the spring-loaded castors work?

The 4 × 40mm castors let you roll the steps into position while they are unoccupied. As a user steps on, their weight compresses the springs and the castors retract, so the unit rests on its four 130mm cupped feet for a stable working position. Step off and the castors drop again.

What is the maximum load, and does it include what I carry?

The maximum load is 125kg. That figure covers the user together with tools, stock or anything else taken up the steps, so add your own weight and the weight of what you are carrying before loading the platform.

Do the steps have handrails?

Yes. These 4 tread mobile safety steps have handrails on both sides and a surround at the platform, giving a handhold on the climb and support at the 1080mm working position. If you need less reach with the same castor and cupped foot design, see the 3 tread mobile safety steps.

Do the steps arrive assembled?

That is your choice. These 4 tread mobile safety steps are available flat packed or fully assembled, so you can take delivery ready to use or in a smaller carton for handling through a site. Both versions use the same frame, treads, handrails and castors.

Which size mobile safety steps do I need?

Choose by the height you need to reach and the floor space you have. This unit gives a 1080mm platform height and a 3.1m approximate working height at 570mm wide and 960mm deep. If you need more reach, step up to the 5 tread mobile safety steps.

Should I choose mobile steps or a step ladder?

Choose mobile safety steps if you move between picking locations through the day and want a steady platform with handrails to work from: they roll into place, then settle onto their cupped feet. A step ladder is lighter to carry and store, so it suits occasional jobs.

Can they be used on carpet or an uneven floor?

They are designed for firm, level floors where the four 130mm cupped feet can make full contact once the castors retract. On soft, sloping or uneven surfaces the feet cannot seat evenly, so find level ground before use and check the floor as part of your risk assessment.

Are the treads slip resistant?

Yes. The tread surface is anti-skid and each tread is 415mm wide, with an even 225mm spacing between treads for a steady climb. The surface also resists water, oil and most chemicals, so grip holds up in workshops and goods-in areas. Keep the treads clear of loose debris.

How often should the steps be checked?

Give them a visual check before every use, looking at the treads, castors, cupped feet, handrails and welds, and take them out of service if anything is damaged. Add a documented inspection to your maintenance programme and record it with ladder inspection tags. Follow HSE guidance on work at height and your own risk assessment.