Wall Mounted Retractable Belt Barrier - ‘Caution - Do Not Enter’ Red Belt - 4.8m
FREE DELIVERY
| 20+ units gets 3% off | |
| 10+ units gets 2% off | |
| 5+ units gets 1% off |
Free Delivery - Next Working Day
4.8m - ‘Caution - Do Not Enter’ Red Belt - No Floor Posts - Powder-Coated Metal Cassette - Free Next Day Delivery
- 4800mm Retractable Belt: Pulls out to close off a corridor, aisle, doorway or racking bay.
- ‘Caution: Do Not Enter’ Message: The printed belt tells people why the route is closed.
- No Floor Posts: Fixes to a wall, so nothing stands in the walkway.
- Powder-Coated Metal Cassette: Black finish gives a hard-wearing surface for daily use.
- Screw-Fixed Wall Plate: Fixes firmly with the screws and wall plugs supplied.
- Receiver Clip Included: Screw the clip to the far wall to hold the belt end.
- Retracts Into the Cassette: The belt stores away neatly when the route is open again.
- 48mm Red Webbed Belt: Vivid red stands out, so restricted zones are easy to spot.
- 110 × 110mm Wall Plate: Compact plate suits pillars and narrow sections of wall.
- 80mm Diameter Cassette: Compact round cassette, and the whole unit weighs 0.5kg.
- 110 × 80 × 80mm: Measures 110mm high, 80mm wide and 80mm deep.
- 1 Year Warranty: Backed by a one-year warranty.
- Free Next Day Delivery: Get your barrier delivered free the next working day.

Close Off Routes With a Clear Caution Message
This wall mounted retractable belt barrier closes off a corridor, doorway, aisle, racking bay or out-of-order lift with no posts on the floor. Its 4800mm red webbed belt reads ‘Caution - Do Not Enter’ and pulls out from a powder-coated metal cassette to a receiver clip on the far wall, so staff and visitors can see the route is closed and why.

Specification
OVERALL HEIGHT- 110mm
OVERALL WIDTH- 80mm
OVERALL DEPTH- 80mm
PLATE HEIGHT- 110mm
PLATE WIDTH- 110mm
CASSETTE DIAMETER- 80mm
BELT LENGTH- 4800mm
BELT HEIGHT- 48mm
BELT THICKNESS- 1mm
CASSETTE MATERIAL- Powder Coated Metal
WEIGHT- 0.5kg
CASSETTE COLOUR- Black
BELT COLOUR- Red
WARRANTY- 1 Year
COMMODITY CODE- 7326909890
GTIN- 0723172211257

Practical 4800mm Belt Length
The 4800mm retractable belt pulls out from the cassette to close off a standard corridor, warehouse aisle, doorway, racking bay or out-of-order lift. When the route opens again, the belt retracts back into the cassette, so there’s no loose tape to roll up or store. Measure the gap first to check it’s within 4800mm.
Wall Mounted With No Floor Posts
This wall mounted barrier fixes straight to a wall or pillar, so nothing stands on the floor. Walkways, aisles and doorways stay clear for people, trolleys and cleaning, and there are no posts to trip over, move or store when the barrier isn’t in use.


110 × 110mm Screw-Fixed Wall Plate
The cassette sits on a 110 × 110mm wall plate that screws to the wall with the fixings supplied. Its compact size suits pillars and narrow sections of wall, and once fixed it stays in place for everyday use.
Receiver Clip and Fixings Included
A screw-on receiver clip fixes to the far wall to take the belt end. The box also holds the screws and wall plugs for both the cassette and the clip, so facilities teams can fit the barrier without buying extra fixings.


Red ‘Caution - Do Not Enter’ Belt
The 48mm high red webbed belt is printed ‘Caution - Do Not Enter’, so it tells people why an area is closed as well as blocking the way. Its vivid red stands out at a glance, which suits plant rooms, cleaning in progress, restricted stores and areas under repair.
Powder-Coated Metal Cassette
The 80mm diameter cassette is powder-coated metal with a black finish. The powder coating gives a hard-wearing surface that resists scratches and corrosion in busy corridors and warehouses, and at 0.5kg the unit is light and easy to handle while fitting.


Made for Indoor Workplaces
This retractable barrier tape is made for indoor use in warehouses, factories, shops, receptions and service areas. Use it to keep staff and visitors out of a cleaning zone, a plant room or a lift under repair. For outdoor sites, choose one of our outdoor belt barriers.
Why Choose This Wall Mounted Retractable Belt Barrier?
- 4800mm Belt – Closes off corridors, aisles, doorways and racking bays.
- Printed Caution Message – The red belt reads ‘Caution - Do Not Enter’.
- No Floor Posts – Fixes to the wall, so walkways stay clear.
- Screw-Fixed Plate – The 110 × 110mm plate fixes firmly with the screws supplied.
- Receiver Clip Included – Screw-on clip for the far wall, with wall plugs in the box.
- Powder-Coated Metal – Hard-wearing black finish on an 80mm cassette.
- Free Next Day Delivery – Order before 4pm for delivery the next working day.

Frequently Asked Questions
How far will the belt reach?
The belt is 4800mm long, which suits a standard corridor, aisle, doorway or racking bay. Measure the gap between where the wall plate and receiver clip will go before ordering. For a narrower gap, our black belt barrier is a shorter model in the same range.
How does it fix to the wall?
It screws to the wall. The cassette sits on a 110 × 110mm wall plate that you fix with the screws and wall plugs supplied, and a screw-on receiver clip fixes to the far wall to hold the belt end when it’s pulled across.
What comes in the box?
You get the cassette on its wall plate, the receiver clip and the screws and wall plugs to fix them both. Have suitable tools ready to drill and fix into your wall before you start.
Will the belt snap back if someone lets go?
It can, as the belt has no brake. Hold the belt end and walk it back to the cassette rather than letting it go, and brief staff to do the same. Include the barrier in your workplace risk assessment, following HSE guidance where needed.
Can it be used outdoors?
It’s designed for indoor use in corridors, aisles, doorways and service areas, and we don’t recommend it for outdoor sites. For car parks, yards and other outside areas, choose one of our outdoor belt barriers.
What if there’s no wall to fix it to?
Use a freestanding barrier instead. This model needs a wall, pillar or other solid surface at each end for the wall plate and receiver clip. For open floors, queues and receptions, our freestanding belt barriers need no wall at all.
Is there a version that fixes to steel racking without screws?
Yes, our magnetic belt barrier attaches by magnets, and its receiver fixes magnetically too. It only fixes to metal, such as steel racking, steel doors and cabinets, and can’t be screwed on. This model is screw-fixed, so it suits solid walls and pillars.
What warranty and delivery do I get?
It comes with a one-year warranty. Delivery is free, and orders placed before 4pm arrive the next working day, so you can close off a route quickly when you need to.
Customer Reviews
How do you rate this product? Guidance:
- Please focus on the item itself. Your review will be most helpful if you include the specific reasons why you either liked or disliked the item.
- Try to be concise and straight to the point - but avoid single-word reviews.

Wall Mounted Retractable Belt Barrier Delivered Fast
Order before 4pm and get your wall mounted retractable belt barrier the next working day. With a 4800mm red ‘Caution - Do Not Enter’ belt, a screw-fixed 110 × 110mm wall plate and no posts on the floor, it suits facilities teams, warehouses and shops closing off corridors, doorways and aisles indoors.
Warranty
1 year
Price Promise
We match any price
Easy Returns
Return or exchange
Terms & Conditions


