Panel Dolly With Handle - 260mm Pneumatic Wheels - 200kg Maximum Load
FREE DELIVERY
| 20+ units gets 3% off | |
| 10+ units gets 2% off | |
| 5+ units gets 1% off |
Free Delivery - Next Working Day
200kg Maximum Load - 260mm Pneumatic Wheels - Fully Welded Steel - Non-Slip Rubber Liner - Free Next Day Delivery
- 200kg Maximum Load: Moves heavy doors, panels and slabs without carrying them by hand.
- 260mm Pneumatic Wheels: Large rubber tyres absorb bumps on uneven site ground.
- Fully Welded Steel Frame: Welded tubular steel stands up to daily site use.
- Non-Slip Rubber Liner: Cushioned liner holds loads in place and helps prevent scuffs.
- 900mm Handle: A long handle helps users guide and steer the loaded dolly.
- Built for Doors and Panels: Carries single doors, panels, slabs and boards such as MDF.
- 25mm Steel Tube: Tubing of 25mm diameter keeps the frame rigid under load.
- Powder-Coated Finish: Yellow powder coat resists scuffs, scratches and corrosion.
- Lightweight 10.2kg Design: Light to lift into a van and carry between jobs.
- 180mm Platform Width: A 180mm wide, 510mm long platform for panels and slabs.
- 1040 × 500 × 375mm: Measures 1040mm high, 500mm long and 375mm wide.
- 1 Year Warranty: Backed by a one-year warranty.
- Free Next Day Delivery: Get your handle delivered free the next working day.
Moves Doors and Panels up to 200kg
The Panel Dolly with Handle moves single doors, panels, slabs and boards around construction sites, workshops, warehouses and shops. Its fully welded steel frame carries up to 200kg on 260mm pneumatic wheels, and a 900mm handle helps users steer, so joiners, shopfitters and facilities teams do less heavy carrying by hand.
Specification
OVERALL HEIGHT- 1040mm
OVERALL WIDTH- 375mm
OVERALL LENGTH- 500mm
- PLATFORM WIDTH
- 180mm
- PLATFORM LENGTH
- 510mm
- PLATFORM HEIGHT
- 140mm
- HANDLE LENGTH
- 900mm
TUBE DIAMETER- 25mm
- WHEEL DIAMETER
- 260mm
WEIGHT- 10.2kg
MAXIMUM LOAD- 200kg
COLOUR- Yellow
MATERIAL- Steel
WARRANTY- 1 year
GTIN- 5061036698178
200kg Maximum Load Capacity
The welded steel frame carries up to 200kg, so joiners, shopfitters, glaziers and facilities teams can move a heavy door, worktop or slab without carrying it by hand. With the weight on the wheels, there’s less lifting and fewer awkward carries across the site, workshop or shop floor.
180mm Platform for Doors and Panels
The 180mm wide, 510mm long platform sits 140mm off the ground and takes doors, panels, slabs and boards such as plywood and MDF. It suits construction, joinery and retail teams moving one large item at a time, from sheet materials to display panels and finished doors.
Fully Welded Steel Frame
Built from fully welded tubular steel with 25mm diameter tubing, the frame holds its shape under heavy loads. It suits daily use on construction sites, in workshops and in warehouses, giving trades and facilities teams a dolly built for repeated heavy moves.
260mm Pneumatic Rubber Wheels
Large 260mm pneumatic rubber wheels grip well and absorb shocks, so the dolly rolls more smoothly over uneven site ground, yards and factory floors. The cushioned ride helps keep the load steady and cuts the effort needed to push it, whether it’s carrying a heavy slab or a finished panel.
900mm Handle for Easy Steering
The 900mm handle gives users leverage and control, so they can guide a long or heavy panel through tight spaces with less strain. On a dolly 1040mm high overall, it puts the grip within easy reach for steering, whether the dolly is loaded or empty.
Non-Slip Rubber Liner
A cushioned, non-slip rubber liner holds materials in place so they don’t slip or shift on the move. It also helps protect doors, glass, polished wood and finished panels from scuffs and scratches, so high-value items are less likely to be marked in transit.
Yellow Powder-Coated Finish
A yellow powder-coated finish protects the steel frame against scuffs, scratches and corrosion through everyday use. The bright colour makes the dolly easy to spot on busy sites and in stores, and the tough coating keeps upkeep to a minimum.
Why Choose This Panel Dolly With Handle?
- 200kg Maximum Load – Moves heavy doors, panels and slabs in one go.
- 260mm Pneumatic Wheels – A smoother ride over uneven site ground.
- Fully Welded Steel – A rigid 25mm tube frame for daily heavy use.
- 900mm Handle – Easy steering for long or heavy panels.
- Non-Slip Rubber Liner – Holds loads steady and helps prevent scuffs.
- Powder-Coated Finish – Resists scuffs, scratches and corrosion.
- Lightweight 10.2kg Design – Easy to lift into a van between jobs.
- Free Next Day Delivery – Order before 4pm for delivery the next working day.
Frequently Asked Questions
What materials can I move on the panel dolly?
It moves single doors, panels, slabs and boards such as plywood and MDF, up to a maximum load of 200kg, on a platform 180mm wide. For moving stacks of board rather than one item at a time, our board trolley may suit the job better.
How much weight can the panel dolly carry?
The panel dolly has a maximum load of 200kg. Never go over it, and centre the load on the platform so it stays stable. Carry out a manual handling risk assessment and follow HSE guidance for loading, unloading and moving heavy panels. For larger quantities of board, see our sheet material cart.
How wide a load will the panel dolly take?
The platform is 180mm wide and 510mm long and sits 140mm off the ground. Check the thickness of your door, panel or slab against the 180mm platform width before loading. For a different style of dolly, see our board dolly.
Will the panel dolly fit through doorways and corridors?
Check your route first: the dolly measures 1040mm high, 375mm wide and 500mm long overall. Measure doorways, corridors and turns against these sizes and allow for the load, which will often be larger than the dolly itself.
Can the panel dolly be used outdoors or on rough ground?
Yes, its 260mm pneumatic rubber wheels grip well and absorb shocks on uneven site ground, yards and paths. Check the route is firm enough for the load, take care on slopes and kerbs, and include outdoor moves in your manual handling risk assessment.
What is the panel dolly made of and how heavy is it?
It is made of fully welded tubular steel with 25mm diameter tubing and a yellow powder-coated finish that resists scuffs, scratches and corrosion. The dolly itself weighs 10.2kg, so it’s easy to lift into a van and move between jobs.
Does the panel dolly need assembling?
Yes, it needs simple assembly. It comes with minimal parts, so it’s quick to put together and ready to start moving loads without a complicated set-up.
What warranty comes with the panel dolly?
The panel dolly is backed by a one-year warranty. If you have a problem with it during that time, contact our team with your order details and we will help.
Customer Reviews
How do you rate this product? Guidance:
- Please focus on the item itself. Your review will be most helpful if you include the specific reasons why you either liked or disliked the item.
- Try to be concise and straight to the point - but avoid single-word reviews.
Panel Dolly With Handle Delivered Fast
Order before 4pm and get your panel dolly with handle the next working day. With a 200kg maximum load, 260mm pneumatic wheels and a fully welded steel frame, it’s a practical choice for joiners, shopfitters, builders and facilities teams moving doors, panels, slabs and boards.
Warranty
1 year
Price Promise
We match any price
Easy Returns
Return or exchange
Terms & Conditions
Panel Dolly With Handle - 260mm Pneumatic Wheels - 200kg Maximum Load
