Surface Foam Impact Protector - 1000mm - Yellow & Black - Self-Adhesive
FREE DELIVERY
| 10+ units gets 28% off | |
| 5+ units gets 28% off |
Free Delivery - Next Working Day
36mm Foam Thickness - Shock-Absorbing PU Foam - Yellow and Black Stripes - Self-Adhesive Backing - Free Next Day Delivery
- 36mm Foam Thickness: Gives a deep cushion on flat walls, machine faces and panels.
- Shock-Absorbing PU Foam: Flexible PU foam cushions knocks from people and trolleys.
- Yellow and Black Stripes: Hazard stripes mark the surface before anyone walks into it.
- Self-Adhesive Backing: Peel and press onto a clean, dry surface with no tools needed.
- 1000mm Length: Cuts down with a sharp knife to suit shorter surfaces.
- TPU Outer Skin: A TPU skin over the foam adds durability against daily bumps.
- −40°C to +100°C Range: Performs indoors from chilled stores to warm plant rooms.
- 36 × 1000 × 39mm: Measures 36mm high, 1000mm long and 39mm wide.
- 1 Year Warranty: Backed by a one-year warranty.
- Free Next Day Delivery: Get your protector delivered free the next working day.

Cushions and Marks Flat Surfaces
This surface foam impact protector sticks to flat walls, machine faces and panels that people or trolleys bump into. Its 36mm foam thickness softens knocks, and the yellow and black stripes mark the hazard. The self-adhesive backing means warehouses, workshops and facilities teams can fit it indoors without tools.

Specification
HEIGHT- 36mm
WIDTH- 39mm
LENGTH- 1000mm
TOP WIDTH- 19mm
MID HEIGHT- 19mm
WEIGHT- 0.65kg
COLOUR- Yellow/Black
MATERIAL- PU Foam
OUTER SKIN- TPU
FIXING- Self-Adhesive
CUT TO LENGTH- Yes, With a Sharp Knife
TEMPERATURE RANGE- −40°C to +100°C
USE- Indoor
WARRANTY- 1 year
GTIN- 5061036694514

36mm Foam Thickness
The 36mm foam thickness gives a deep cushion across flat surfaces, with a 39mm overall width and a 19mm top width. That makes it a straightforward fit for walls, machine faces and the flat sides of pillars, where a hard surface is easy to walk or wheel into.
Absorbs Knocks
The PU foam cushions knocks from people and trolleys, helping reduce the risk of injury on a hard surface. It also protects the surface itself, so walls, machines and panels take less damage from everyday bumps in warehouses, workshops and busy corridors.


Yellow and Black Hazard Stripes
Yellow and black hazard stripes make the surface stand out, so staff and visitors notice it before they reach it. It’s a simple way to mark a hazard found during an inspection or after a bump, on walls, machine faces and pillars.
PU Foam With TPU Skin
High-density PU foam gives the cushion, and a TPU outer skin covers it for extra durability against daily knocks. The foam stays flexible, so it sits closely against the surface, and at 0.65kg per 1000mm length it’s light and easy to handle when fitting.


Self-Adhesive Backing
The self-adhesive backing uses a adhesive that gives a permanent fixing on a clean, dry surface. Once fitted it stays put, and if it ever has to come off, it can be pulled away and any residue wiped off.
Fits Without Tools
Peel off the backing and press the protector onto a clean, dry surface: no drills, screws or tools are needed. Each piece comes as a 1000mm length and cuts down with a sharp knife to suit shorter surfaces, so maintenance teams can fit it straight away.


Works From −40°C to +100°C
The foam performs from −40°C to +100°C, so it suits indoor spaces where temperatures vary, from chilled storage areas to warm plant rooms and workshops. It’s made for indoor use, so fit it inside buildings rather than on outdoor structures.
Why Choose This Surface Foam Impact Protector?
- 36mm Foam Thickness – Gives a deep cushion on flat indoor surfaces.
- Cushions Knocks – PU foam softens bumps from people and trolleys.
- Hazard Stripes – Yellow and black stripes make surfaces easy to spot.
- Fits Without Tools – Peel off the backing and press it into place.
- Cuts to Length – Trim the 1000mm length with a sharp knife.
- Stays Put – Adhesive gives a permanent fixing.
- −40°C to +100°C – Performs indoors across a wide temperature range.
- Free Next Day Delivery – Order before 4pm for delivery the next working day.

Frequently Asked Questions
What kind of surface does this protector fit?
It fits flat surfaces, with a 36mm foam thickness that cushions knocks across the face of a wall, machine or panel. Typical uses are walls, machine faces and the flat sides of pillars indoors. For square corners, see our right angle protection foam and the rest of the range.
How do I fit the surface protector?
Clean and dry the surface, peel off the backing and press the protector firmly into place. No tools are needed. The self-adhesive backing uses a adhesive, which gives a permanent fixing once applied.
Can I cut it to length?
Yes. Each protector comes as a 1000mm length and cuts down with a sharp knife, so you can fit shorter surfaces or use offcuts on more than one hazard. Cut it before peeling off the backing for a clean edge.
Can I remove it later?
It’s designed as a permanent fixing and stays put once fitted. If you do need to take it off, it can be pulled away and any adhesive residue wiped off the surface. It isn’t designed to be refitted, so plan to use a new length.
Can it be used outdoors?
No, it’s for indoor use only. Within buildings it performs from −40°C to +100°C, so it suits chilled storage areas, warehouses, workshops and warm plant rooms.
Do you have a version for low beams and doorways?
Yes. For overhead hazards where people may hit their heads, our head protection foam has a flat back that sticks to low beams and doorways. Use your risk assessment to decide where head-height protection is needed.
What should I use to protect pipework?
This surface profile is made for flat surfaces, not pipes. For pipe or tube, choose our tube protection foam, which wraps around the pipe and has the same yellow and black stripes and self-adhesive fitting.
What warranty does it come with?
Each surface foam impact protector is backed by a one-year warranty. If you have a problem with it, contact our team with your order details and we’ll help.
Customer Reviews
How do you rate this product? Guidance:
- Please focus on the item itself. Your review will be most helpful if you include the specific reasons why you either liked or disliked the item.
- Try to be concise and straight to the point - but avoid single-word reviews.

Surface Foam Impact Protector Delivered Fast
Order before 4pm and get your surface foam impact protector the next working day. With a 36mm foam thickness, yellow and black hazard stripes and self-adhesive fitting without tools, it’s a quick fix for warehouses, workshops and facilities teams marking flat indoor hazards.
Warranty
1 year
Price Promise
We match any price
Easy Returns
Return or exchange
Terms & Conditions


