Pipe Foam Impact Protector - 1000mm - Yellow & Black - Self-Adhesive

£26.47 Ex. VAT £31.76 Inc. VAT
£31.76 Inc. VAT £26.47 Ex. VAT

FREE DELIVERY

10+ units gets 28% off
5+ units gets 28% off
SKU CODE: IMPACTPROTECTOR-9
In Stock (16 units)

Free Delivery - Next Working Day

Klarna available at checkout

8mm Internal Width - Self-Adhesive Backing - Shock-Absorbing PU Foam - Yellow and Black Stripes - Free Next Day Delivery

  • Shock-Absorbing PU Foam: Flexible PU foam cushions knocks from people and trolleys.
  • 8mm Internal Width: An 8mm wide rectangular channel runs the length of the foam.
  • 19mm Internal Height: The channel is 19mm high inside a profile 40mm high and wide.
  • Yellow and Black Stripes: Stripes make the hazard stand out before anyone reaches it.
  • Self-Adhesive Backing: Peel and press onto a clean, dry surface with no tools needed.
  • 1000mm Length: Cuts down with a sharp knife to suit shorter runs.
  • TPU Outer Skin: A TPU skin over the foam adds durability against daily bumps.
  • −40°C to +100°C Range: Performs indoors from chilled stores to warm plant rooms.
  • 40 × 1000 × 40mm: Measures 40mm high, 1000mm long and 40mm wide.
  • 1 Year Warranty: Backed by a one-year warranty.
  • Free Next Day Delivery: Get your protector delivered free the next working day.
Quick Links:
Worker in a hard hat lifting a box beside racking fitted with a yellow and black Pipe Foam Impact Protector

Cushions and Marks Indoor Hazards

This pipe foam impact protector is a 40mm high, 40mm wide length of flexible PU foam with a 19mm × 8mm rectangular channel running through it. It sticks to flat, straight surfaces to soften knocks from people and trolleys, and its yellow and black stripes mark the hazard. Warehouses, offices and sports facilities can fit it indoors without tools.

Pipe Foam Impact Protector dimensions

Specification

HEIGHT
40mm
WIDTH
40mm
LENGTH
1000mm
INTERNAL HEIGHT
19mm
INTERNAL WIDTH
8mm
WEIGHT
0.65kg
COLOUR
Yellow/Black
MATERIAL
PU Foam
OUTER SKIN
TPU
FIXING
Self-Adhesive
CUT TO LENGTH
Yes, With a Sharp Knife
TEMPERATURE RANGE
−40°C to +100°C
USE
Indoor
WARRANTY
1 year
GTIN
5061036694507
End view of the Pipe Foam Impact Protector showing the rectangular channel running through the thick foam

8mm Internal Width Channel

A rectangular channel 8mm wide and 19mm high runs through the full length of the foam, inside a profile 40mm high and 40mm wide. That leaves a deep layer of foam around the channel, so the protector gives a generous cushion on hard surfaces where people and trolleys pass.

Absorbs Knocks

The flexible PU foam cushions knocks from people and trolleys, helping reduce the risk of injury on a hard surface. It also protects what it covers, so walls, frames and machinery take less damage from everyday bumps in warehouses, offices, sports facilities and busy corridors.

Angled close-up of the Pipe Foam Impact Protector's cut end, showing its thick, cushioning foam
Pipe Foam Impact Protector with bold yellow and black diagonal hazard stripes along its length

Yellow and Black Hazard Stripes

Yellow and black hazard stripes make the hazard stand out, so staff and visitors notice it before they reach it. It’s a simple way to mark a hazard found during an inspection or after a bump, without putting up extra signs.

PU Foam With TPU Skin

Flexible PU foam gives the cushion, and a TPU outer skin covers it for extra durability against daily knocks. At 0.65kg per 1000mm length it’s light and easy to handle when fitting, even on longer runs that need several lengths.

Cut end of the Pipe Foam Impact Protector showing the PU foam core inside its striped outer skin
Pipe Foam Impact Protector seen from the channel side, with the self-adhesive strip running along its length

Self-Adhesive Backing

The self-adhesive backing uses a adhesive that gives a permanent fixing on a clean, dry surface. Once fitted it stays put, and if it ever has to come off, it can be pulled away and any residue wiped off.

Fits Without Tools

Peel off the backing and press the protector onto a clean, dry, flat and straight surface: no drills, screws or tools are needed. Each piece comes as a 1000mm length and cuts down with a sharp knife to suit shorter runs, so maintenance teams can fit it straight away.

Close-up of a cleanly cut end of the Pipe Foam Impact Protector, ready to fit without tools
Length of yellow and black Pipe Foam Impact Protector on a white background

Works From −40°C to +100°C

The foam performs from −40°C to +100°C, so it suits indoor spaces where temperatures vary, from chilled storage areas to warm plant rooms and workshops. It’s made for indoor use, so fit it inside buildings rather than on outdoor structures.

Why Choose This Pipe Foam Impact Protector?

  • 8mm Internal Width – A 19mm × 8mm channel runs through the full length.
  • Cushions Knocks – PU foam softens bumps from people and trolleys.
  • Hazard Stripes – Yellow and black stripes make hazards easy to spot.
  • Fits Without Tools – Peel off the backing and press it into place.
  • Cuts to Length – Trim the 1000mm length with a sharp knife.
  • Stays Put – Adhesive gives a permanent fixing.
  • −40°C to +100°C – Performs indoors across a wide temperature range.
  • Free Next Day Delivery – Order before 4pm for delivery the next working day.
Pipe Foam Impact Protector, a 1000mm length with yellow and black hazard stripes, on white

Frequently Asked Questions

  • What size is the channel inside the protector?

    The rectangular channel is 8mm wide and 19mm high, and it runs through the full 1000mm length. The protector itself measures 40mm high and 40mm wide, and its self-adhesive backing fixes it to a clean, dry, flat and straight surface indoors.

  • How do I fit the pipe protector?

    Clean and dry the surface, peel off the backing and press the protector firmly into place. No tools are needed. It’s best fitted to flat, straight surfaces, and the adhesive gives a permanent fixing once applied.

  • Can I cut it to length?

    Yes. Each protector comes as a 1000mm length and cuts down with a sharp knife, so you can fit shorter runs or use offcuts on more than one hazard. Cut it before peeling off the backing for a clean edge. The other shapes cut down the same way, including our tube protection foam for round pipe and tube.

  • Can I remove it later?

    It’s designed as a permanent fixing and stays put once fitted. If you do need to take it off, it can be pulled away and any adhesive residue wiped off the surface. It isn’t designed to be refitted, so plan to use a new length.

  • Can it be used outdoors?

    No, it’s for indoor use only. Within buildings it performs from −40°C to +100°C, so it suits chilled storage areas, warehouses, workshops and warm plant rooms.

  • Do you have a version for low beams and doorways?

    Yes. For overhead hazards where people may hit their heads, our head protection foam has a flat back that sticks to low beams and doorways. Use your risk assessment to decide where head-height protection is needed.

  • What warranty does it come with?

    Each pipe foam impact protector is backed by a one-year warranty. If you have a problem with it, contact our team with your order details and we’ll help.

Customer Reviews



How do you rate this product? Guidance:

  • Please focus on the item itself. Your review will be most helpful if you include the specific reasons why you either liked or disliked the item.
  • Try to be concise and straight to the point - but avoid single-word reviews.

Your Rating:
  1 star 2 stars 3 stars 4 stars 5 stars
Quality
Your Name:
Your Review:
Pipe Foam Impact Protector Delivered Fast

Pipe Foam Impact Protector Delivered Fast

Order before 4pm and get your pipe foam impact protector the next working day. With a 19mm × 8mm internal channel, yellow and black hazard stripes and self-adhesive fitting without tools, it’s a quick fix for warehouses, offices and facilities teams marking indoor hazards.

Warranty

1 year

Price Promise

We match any price

Easy Returns

Return or exchange

Terms & Conditions